Kayama DPS-115 1P 15kA 275V Lightning Surge Protector (SPD)

Technical Description

The Kayama DPS-115 Surge Protection Device 15kA 275V 1P is intended to protect electrical circuits against transient surge events.

The product is identified as model DPS-115 and, according to the supplied identification, has a stated voltage of 275V, 1P configuration and a stated current specification of 15kA.

Its application should consider the electrical system characteristics, circuit voltage, protection scheme and compatibility with the other installed components.

Confirmed Technical Characteristics

• Brand: Kayama
• Product: Surge Protection Device / SPD
• Model: DPS-115
• Stated voltage: 275V
• Stated configuration: 1P
• Stated current: 15kA
• Purpose: protection of electrical circuits against surges

Surge Protection

The device is intended to be part of an electrical protection system against transient surge events.

Its operation should be considered within a properly designed protection system.

DPS-115 Model

The supplied product identification states model DPS-115.

The SPD should be selected according to the electrical characteristics and technical requirements of the installation.

275V Specification

The product is identified with 275V.

The available information does not reliably establish whether this value represents maximum continuous operating voltage, nominal voltage or another specific device rating.

It is therefore presented only as the stated 275V value.

1P Configuration

The product identification states 1P configuration.

This information is retained as supplied without assigning additional connection or system characteristics that have not been confirmed.

15kA Specification

The product is identified with 15kA.

The available information does not reliably establish whether this value refers to nominal discharge current, maximum discharge current or another SPD current classification.

It is therefore presented only as the stated 15kA current value.

Selection and Compatibility

Before application, confirm system voltage, electrical configuration, grounding scheme, panel characteristics and project protection requirements.

Installation and Safety

De-energize the circuit before installation. The device should be installed by qualified personnel and according to the applicable electrical design and wiring requirements.

Registration Information

• Brand: Kayama
• Product: Surge Protection Device
• Model: DPS-115
• Voltage: 275V
• Configuration: 1P
• Stated specification: 15kA

Kayama Quality

The Kayama DPS-115 15kA 275V 1P Surge Protection Device is intended for use in compatible electrical surge protection systems.